>> Hydraulic Vulcanizing Presses

Rubber Transfer Injection Molding Machine/Transfer type Molding Machine

 Transfer type Injection Molding Machine/Rubber Transfer Molding machine can produce the most of the products which are produced by Rubber Injection Molding Machine. Especially for the production of complex shapes, metal insert product and other hard molding products with high precision and high performance requirements, highlighting its quality and cost advantages.

 
Main features for rubber transfer molding machine:
1.Clamping mold before curing, then press rubber into mold cavities evenly, ensure the finished products with very less flash and well-distributed physical properties ,high qualification rate..
2.Advanced structural design and advanced material handling technology, with minimum gap and not adhering to cylinder.
3.No remaining material in barrel, reduce material waste, convenient material changing and easy replacement of molds, ideal for small scale production.
4.The rubber transfer molding vulcanizing machine is widely used, it can produce most kinds of of rubber with the max. hardness Shore 90 degrees .Preparing rubber blank is very easy, greatly shortening curing time.
5. With two program mode to achieve a machine for dual-use, it can be used as injection press and also the platen vulcanizing machine,wide applicability.
6. The mold structure is simple, reducing mold manufacturing cost.
7. Options available for  special mold opening mechanism (3RT, 4RT, track-guide opening mode, etc.), rubber preheating system, servo energy-saving system.
 
Work flow:
Initial state →Program start →Ejector cylinder reset →Mold move in →Fast mold closing →Slow clamping,pressing →Feed material into barrel manually →Exhaust and do curing →mold open →Move out mold →Ejector cylinde works to separate products from mold →Take out the finished product
 
Technical Specification:

Model

JC-YCB100T

JC-YCB200T

JC-YCB300T

JC-YCB350T

JC-YCB500T

Tonnage

100T

200T

300T

350T

500T

Max.system pressure

21 Mpa

21 Mpa

21 Mpa

21 Mpa

21 Mpa

Rapid Clamping speed

60mm/s

60mm/s

60mm/s

50mm/s

50mm/s

Platen size(mm)

450x450

 

500x500

510x540

 

600x550

 

700x650

 

700x700

700x700

800x800

950x800

Daylihgt opening (mm)

  350

400

400

400

400

Max.temperature()

250

250

250

250

250

     Material barrel size(mm)

φ80x255

φ90x290

φ110x355

φ110x355

φ130x445

Injection pressure (Mpa)

60

60

100

100

100

Injection stroke(mm)

350

380

450

450

580

Max.ejector force

60KN

60KN

100KN

100KN

100KN

Mold handling system

2TR/3RT/4RT

2TR/3RT/4RT

2TR/3RT/4RT

2TR/3RT/4RT

2TR/3RT/4RT

Ejector stroke(mm)

250

300

350

400

450

Motor power(KW)

5.5

7.5

7.5

11

13

Heating power(KW)

9.6

18.6

20.6

20.6

27.8

Dimension(LxWxH:mm)

1700x2100x3100

1950x2300x3250

2150x2600x3900

2550x3600x5250

2750x4200x5950

Oil tank capacity(Liters)

270

320

350

400

600

 

Notes: the form only list out the normal standard model, more special models can be customized to order.